Advertisements
//
you're reading...
Travel - World

Goulburn Waterworks Museum


Historic Goulburn Waterworks Museum at Marsden Weir, on the Wollondilly River

Goulburn Waterworks became operational in January 1886, to provide a reticulated water supply to the growing City of Goulburn. Before 1886 the residents of Goulburn would have collected water in tanks or wells, or purchased supplies from a carter. The demand of the growing city resulted in the Rivers and Harbours Board installing a waterworks on the Wollondilly River at Rocky Point powered by a steam operated beam engine. Water was pumped from the river to a filtration plant and reservoir, then gravity fed to residents of the city.

The original 1883 Appleby Bros. steam engine, situated inside the pumphouse, was one of four installed in Pumphouses around NSW. The others were at Wagga Wagga, Albury (both scrapped in 1936) and Bathurst . The steam engine is known as a beam engine because of the large overhead rocking beam that transmits motion from the pistons to the cranks.

This great beam engine, of the type first invented by Thomas Newcomen in 1712, is an example of the powerhouse that drove the Industrial Revolution. Originally designed for pumping water out of mines in the UK it was improved by Watt, Smeaton, Maudsley and other engineers of the steam age until it became a very efficient and reliable engine.

Apart from mines and water supplies, many thousands were used to drive factory machinery in the 18th and 19th centuries; four operated in factories in Goulburn, until they were superseded by electric motors in the early 20th century.

The Five Metre Fly Wheel At Goulburn Waterworks Museum

The Goulburn Waterworks engine is of medium size and produces 120 horse power. It has compound cylinders and a jet condenser. The fly wheel is 5 metres in diameter and at 18 r.p.m. the pumps delivered 660,000 litres of water per hour.

The two boilers that produce the steam that powers the engine, are located in the western wing of the building.

Fired by wood or coal, they produce high temperature steam that is piped through to the beam engine in the central part of the building. Only one boiler would have been operational at any one time. The other being shut down for regular cleaning and maintenance.

Steam from the boilers enters the valve chest on the cylinders from where it is transmitted to the cylinders by means of a valve mechanism. The action of the steam on the pistons causes them to reciprocate. Rods connect the pistons to the beam at one end, and to the crank at the other. This converts the ‘rocking’ motion to rotary motion which makes the flywheel turn, giving a smooth and continuous action

By 1918 the beam engine had became obsolete when electric motors were installed. Idle for many years, Goulburn’s Beam Engine was restored in 1958.

The east wing of the building houses a horizontal steam engine, the Hick Hargreaves and the early dynamo room with its electric pump.

The Waterworks is notable not just for its historic steam engine, but for the elegant Victorian building that houses the beam engine and boilers. Only metres away further up the hill stands the original fireman’s cottage, also of Victorian design.

From 1968 the Goulburn Waterworks operated as a museum of engines. It was during this period that a grant was made available under the Regional Employment Development Scheme (1975) which saw some of this funding used for the installation of the Hick Hargreaves engine now on display and operational on steaming days, in the annexe of the pumphouse.

The single cylinder horizontal engine measures 9 metres in length, weighs 17 tons with the flywheel being 4 metres in diameter.

It was originally used to power equipment in a Sydney tannery, becoming discarded in 1961. It was reported that it had been acquired to represent the next stage of steam engine development after the beam type engine.

Advertisements

About Craig Hill

General Manager at Craig Hill Training Services * Get an Australian diploma by studying in your own country * Get an Australian diploma using your overseas study and work experience * Diplomas can be used for work or study in Australia and other countries. * For more information go to www.craighill.net

Discussion

No comments yet.

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out /  Change )

Google photo

You are commenting using your Google account. Log Out /  Change )

Twitter picture

You are commenting using your Twitter account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )

Connecting to %s

This site uses Akismet to reduce spam. Learn how your comment data is processed.

Advertisements

Get An Australian Diploma

China Daily Mail

China Daily Mail is not affiliated in any way with The China Daily or the government of the People's Republic of China.

Enter your email address to receive an email each time an article is published, or join our RSS feed. 100% FREE.

Want to write for China Daily Mail?

Read "Contributor Guidelines" above to join our team of 68 contributors. Write news or opinion about issues in China, or post photos and video. Promote your own site.

Recent Posts

China Daily Mail Stories Have Been Featured In:

Advertisements
%d bloggers like this: